---
title: Game Server Monitoring with Discord Alerts
description: Know your game server is down before your players do. Steam, Minecraft, FiveM, SA-MP and MTA status checks, latency per region, Discord alerts without a bot.
canonical: https://watchfor.io/game-server-monitoring
---

New

# Game server monitoring: know it's down before your players do

WatchFor asks your server the same question the in-game server browser does, from the regions your players are in. You see players, map, ping, packet loss and jitter on every check, set thresholds that fit each region, and your Discord hears about an outage once it is confirmed, not when one packet goes missing.

[Monitor a game server](/auth/sign-up)[See the supported games](#games)

Included from the Starter plan. No plugin, no RCON, no bot, no ads.

### The game's own query

Steam A2S, Minecraft Java and Bedrock, FiveM, SA-MP and MTA. A server holding its port while it hangs is still caught.

### Confirmed, not guessed

A failure is re-checked before an incident opens. One lost UDP packet never pings your Discord.

### Ping and loss by region

Ping, packet loss and jitter from up to 20 locations, with thresholds per region. Two regions on Starter, all seven on Business.

### Discord without a bot

A channel webhook carries the alert, with the map, the last player count and a Join link.

## Supported games

27 games with their own preset, plus any other Steam game by its query port. Each tile opens the game's ports and setup.

### Steam games

Steam server query (A2S, UDP)

[Counter-Strike 2Query port 27015](/game-server-monitoring/cs2)[Counter-Strike: Global OffensiveQuery port 27015](/game-server-monitoring/cs2)[Team Fortress 2Query port 27015](/game-server-monitoring/tf2)[Garry's ModQuery port 27015](/game-server-monitoring/garrys-mod)[Left 4 Dead 2Query port 27015](/game-server-monitoring/left-4-dead-2)[RustQuery port 28017](/game-server-monitoring/rust)[ARK: Survival EvolvedQuery port 27015](/game-server-monitoring/ark)[DayZQuery port 2303](/game-server-monitoring/dayz)[Arma 3Query port 2303](/game-server-monitoring/arma-3)[ValheimQuery port 2457](/game-server-monitoring/valheim)[7 Days to DieQuery port 26900](/game-server-monitoring/7-days-to-die)[Project ZomboidQuery port 16261](/game-server-monitoring/project-zomboid)[V RisingQuery port 9877](/game-server-monitoring/v-rising)[EnshroudedQuery port 15637](/game-server-monitoring/enshrouded)[Conan ExilesQuery port 27015](/game-server-monitoring/conan-exiles)[UnturnedQuery port 27015](/game-server-monitoring/unturned)[Space EngineersQuery port 27016](/game-server-monitoring#more-steam-games)[Killing Floor 2Query port 27015](/game-server-monitoring/killing-floor-2)[MordhauQuery port 27015](/game-server-monitoring#more-steam-games)[Insurgency: SandstormQuery port 27131](/game-server-monitoring/insurgency-sandstorm)[SoulmaskQuery port 27015](/game-server-monitoring#more-steam-games)[Other Steam gameA2S ·Any query port](/docs/monitors/game#supported-games)

### Minecraft

Java server list ping (TCP) · Bedrock ping (UDP)

[Minecraft: Java EditionPort 25565 or SRV](/game-server-monitoring/minecraft)[Minecraft: Bedrock EditionQuery port 19132](/game-server-monitoring/minecraft)

### FiveM and RedM

Cfx.re HTTP endpoints (TCP)

[FiveMGTA V ·Query port 30120](/game-server-monitoring/fivem)[RedMRed Dead Redemption 2 ·Query port 30120](/game-server-monitoring/fivem)

### San Andreas multiplayer

SA-MP query · MTA All-Seeing Eye (UDP)

[SA-MP / open.mpQuery port 7777](/game-server-monitoring/samp)[MTA: San AndreasQuery port 22126](/game-server-monitoring/mta)

### More Steam games

Same preset, same checks, no page of their own yet. The ports come from each game's server guide; Test in the form confirms yours before you save.

Game Monitor this port Players join Good to know

Space Engineers 27016 (ServerPort) 27016 Guides disagree on whether the Steam query answers on ServerPort or on SteamPort (8766 in SpaceEngineers-Dedicated.cfg). Test tries both and offers the one that answered.

Mordhau 27015 (-QueryPort) 7777 The beacon port (15000) and RCON are separate and don't answer status queries.

Soulmask 27015 (-QueryPort) 8777 The echo port (18888, TCP) is for local maintenance only; it doesn't need to be public.

No public status query, no game data: ARK: Survival Ascended, Palworld, current Squad and vanilla Terraria servers can still be watched for reachability with a [UDP](/udp-monitoring) or [TCP](/tcp-monitoring) monitor.

## What you see for every server

Real screens from a WatchFor demo organization watching public servers

### The server, the way players see it

Players as one big number out of the slots, the server's name, game, map and version, and badges for VAC, a password and bots. A Connect button opens Steam or FiveM straight into the server; Minecraft, SA-MP and MTA get the address to copy.

The monitor's Overview: uptime, incidents, the server card and population.

### Every player count, kept

The population chart keeps the count from every check against the server's slots, with the day's peak and the record in range above it. Outages, updates and map changes are marked on the line, so a drop in players next to a new version or a crash explains itself.

A day of a CS2 deathmatch server, with its outages and an update marked.

### Every map, and how full it ran

Which map ran when, and every map ranked by its share of the time with the average and peak players while it was on. A map that empties the server, or a rotation that stopped rotating, is plain to see; the population chart marks each change, and hovering a mark says from which map to which.

One day of a co-op server: twelve chapters on one strip.

### When your server is busy

A weekday-by-hour heatmap of average and peak players in your own time zone, built from your checks, with the quietest window named. It answers when to restart, when to wipe and when to run an event with data instead of a guess.

Average players by weekday and hour; days fill in as the checks come in.

## Ping and packet loss, judged region by region

A server in Europe answers European locations in 8 ms and Asian ones in 190. Both are normal for where they are; only a change is news.

One server seen from eight locations in five regions over the last 6 hours.
- Ping, packet loss and jitter per location Each check sends a short train of queries, 5 by default and 150 ms apart, so every location reports the round trip, the share of packets lost and how much the delay swings. The Ping & packet loss card gives each location a tile and a line of its own, and shades the stretches of high loss on the chart.
- Thresholds that fit each region Start with one threshold for all regions and see each region's current ping under the sliders. When a far-away region needs its own, Different thresholds by region opens a table: each region inherits the default until you type a value, has its own alerts switch and is judged on its own. A location in a new region starts with alerts off.
- Suggest from data Fills in each region's thresholds from the 95th percentile of its own checks, with room for normal jitter. Nothing is saved until you press Save. Packet loss has the same button.
- Confirmed where it happens A region's rule is confirmed from that region's locations only, and the incident, the email and the Discord message name it: "High Game Server Latency (Asia)". Offline is always judged from every region, so an outage is never ignored because of where it was seen.

A Rust server in Europe: Europe keeps the default, the far regions take values suggested from their own checks.

### Test before you save

Test sends one query from the nearest location with the settings in the form, nothing saved. When the port you typed is silent, it asks the ports that game's servers usually answer on and offers the one that replied, with the server's name, players and map, so you know it is the right server before the first check runs.

Rust on the game port: Test finds the query port and names the server.

## Set up in a minute

No plugin, no RCON password, no bot to invite

- 1

### Pick the game

Choose your game from the picker. WatchFor fills in the usual query port and speaks that game's own status protocol.

- 2

### Paste the address

Enter the server's IP or hostname. Test asks it once from the nearest location; when the port is silent it tries the game's other usual query ports and offers the one that answered.

- 3

### Choose where alerts go

A Discord channel webhook, Telegram, Slack, email or any of the other channels. The server is checked around the clock, and an outage is confirmed before anyone is told.

## Alerts in Discord the moment it's confirmed down

Paste a channel webhook and you are done: no bot to invite, no permissions to grant, no limit on how many servers post to one channel. The offline message names the server, the map and how many were playing, with a Join link; the recovery says how long it was gone.

Game queries are UDP packets, and some get lost on one route while the server is fine. With packet loss measurement on, the default for new monitors, each check sends a short train of queries and the server counts as online when any of them is answered; a check where nothing answers is repeated, from your other locations when the monitor has several, before it opens an incident. Your community learns to trust the alert instead of muting it.

- Offline, back online, high latency; optional rules for packet loss, jitter, an empty or full server, a password or VAC switched off
- Latency and packet loss thresholds per region, and the alert names the region
- The same alert to Telegram, Slack, Microsoft Teams, email, ntfy, Pushover or a webhook
- On-call rotations and escalation for teams that run many servers

- Discord
- Telegram
- Slack
- Microsoft Teams
- Email
- ntfy
- Pushover
- Webhooks

Slack, Microsoft Teams, Discord, Telegram, Google Chat, Mattermost, Rocket.Chat, PagerDuty, Opsgenie, ntfy, Gotify, Pushover, Pushbullet and Zapier names and logos are trademarks of their respective owners, shown only to indicate that WatchFor can send alerts to these services. WatchFor is not affiliated with, sponsored or endorsed by them. Gotify logo by the Gotify project, CC BY 4.0.

[All notification channels](/alerting-integrations)

## Check your game server right now

The free status checker runs the same query as the monitor, from three regions at once: players, map, version, latency and the player list. No login.

[Game Server Status Checker](/game-server-status-checker)

## A status page your community can bookmark

Put your servers on a public status page, on your own subdomain if you like: each one with its state, players out of slots, 90 days of uptime and a Join row. Steam and FiveM servers get a Connect button; the rest show the address to copy. Planned maintenance, such as a wipe or a weekly restart, can be announced on the same page.

Player names never appear there. The page answers "is it up?" in your Discord's pinned message, once.

[About status pages](/status-pages)

Game servers on a public status page, with Connect.

## Every server from your own scripts

Hosts and networks with many servers add them from a script, and an AI agent can ask the same questions you do in the dashboard.

- type: "game" monitors and their alert rules in the [REST API](/docs/api/monitors), with regions on latency and packet loss rules
- [Suggested thresholds](/docs/api/alert-rules#suggested-thresholds) per region, for latency or packet loss
- The MCP tools get_suggested_thresholds and run_diagnostic with game-server-check , for AI agents
- suggestedThresholds in the TypeScript and suggested_thresholds in the Python SDK

# Packet loss thresholds per region, from the last 7 days of checks
curl -G https://watchfor.io/api/v1/monitors/$MONITOR_ID/suggested-thresholds \
-d metric=packet_loss \
-H "Authorization: Bearer $WATCHFOR_API_KEY"

## How it compares

Each kind of tool is good at something. Here is what each one does for the person who runs the server.

Capability WatchFor Server lists and trackers Discord status bots Generic uptime monitors Self-hosted Uptime Kuma

Reads the game's own status (players, map, version) Yes Yes Yes an open port or a raw UDP reply up/down, name and ping (GameDig)

Games covered Steam (A2S) games, Minecraft Java and Bedrock, FiveM and RedM, SA-MP / open.mp, MTA Dozens Hundreds through GameDig Any port, no game data 300+ through GameDig

Checks from several locations up to 20 locations, regions per plan; failures re-checked before an incident one poller one poller Yes wherever you host it

Ping, packet loss and jitter by region a packet train on every check No No Response time, no game ping No

Alert thresholds per region each region judged on its own, suggested from your data No No one threshold for every location No

Discord alerts channel webhook, no bot to invite Limited invite their bot Yes Yes

Slack, Telegram, Teams, email, webhooks Yes Email at most No Yes Yes

Uptime history and incidents confirmed incidents, 90-day uptime Player history No Yes Yes

Public status page with a Join button own subdomain, Connect for Steam and FiveM Server page on their site A Discord embed Status page, no game data Status page, no game data

Busy hours and map rotation Yes Player charts No No No

RCON administration, bans, player database WatchFor only watches Often (BattleMetrics RCON) No No No

Ad-free Yes ads are common Some are Yes Yes

To get started Sign up; included from the Starter plan Free to browse; admin tools paid Invite a bot; offline alerts often paid Sign up Run and maintain your own server

Typical for each kind of tool, from their public pages in November 2026; individual products differ. Where another tool is the better fit, say for RCON administration and ban lists, use it next to WatchFor.

## Frequently asked questions

What server owners ask before they add a game server

[All questions→](/faq)[Ask us directly](/contact)

Which games can WatchFor monitor? Every game whose servers answer the Steam server query (A2S): Counter-Strike 2, Team Fortress 2, Garry's Mod, Rust, ARK: Survival Evolved, DayZ, Arma 3, Valheim, 7 Days to Die, Project Zomboid, V Rising, Enshrouded and more, plus a generic preset for any other Steam game. Minecraft Java and Bedrock, FiveM and RedM, SA-MP and open.mp, and MTA: San Andreas have their own protocols. Games without a public query, such as ARK: Survival Ascended, Palworld or vanilla Terraria, can still be watched for reachability with a [UDP](/udp-monitoring) or [TCP monitor](/tcp-monitoring).

What is a query port, and which one do I enter?

Do I need RCON, a plugin or a bot on my server?

Why does an alert say "confirmed"?

Does WatchFor show packet loss and jitter?

Can a far-away region have its own latency threshold?

What does Suggest from data do?

My DDoS protection drops queries from data centres. What now?

Are player names shown on the status page?

What does it cost?

Can players join from the status page?

## From our blog

Guides, deep-dives, and best practices from the WatchFor team

[Game servers

### Rust query port vs game port, wipe day, and tracking your server's population

Nov 16, 2026·7 min readRead article](/blog/rust-query-port-and-wipe-day)[Game servers

### DayZ steamQueryPort explained, and how to tell a scheduled restart from real downtime

Nov 16, 2026·7 min readRead article](/blog/dayz-steam-query-port-and-restarts)[Game servers

### Will GTA 6 have RP servers? What the November 19 launch means for FiveM roleplay

Nov 16, 2026·8 min readRead article](/blog/gta-6-rp-servers-fivem)

## Watch your game server tonight

Add your server, pick the game and paste the address. Within a minute you see players, map and latency, and the next outage reaches your Discord once it is confirmed. Game servers are included from the Starter plan.

[Monitor a game server](/auth/sign-up)[Read the docs](/docs/monitors/game)

---

Canonical page: https://watchfor.io/game-server-monitoring · Site guide: https://watchfor.io/llms.txt
